Specifications
Stainless Steel Series
| S-20
(1/2 Inch) | S-26
(3/4 Inch)
| S-31
(1-1/2 Inch)
| S-50
(2 Inch)
| Max. Air Supply Pressure
| 6.8 bar
| 6.8 bar
| 8.3 bar
| 8.3 bar
| Inlet / Outlet
| 1/2" NPT
| 3/4" NPT
| 1" NPT
| 2 " NPT
| Air Inlet
| 1/4" NPT
| 1/4" NPT
| 3/8" NPT
| 1/2" NPT
| Min. Pressure for Starting Air Valve
| 1.2 bar
| 1.2 bar
| 1.3 bar
| 1.3 bar
| Max Flow Rate
| 13.82 G.P.M.
(52 LPM)
| 14 .88 G.P.M.
(56 LPM)
| 45.19 G.P.M.
(180 LPM)
| 154.84G.P.M.
(580 LPM)
| Max Speed
| 400 cpm
| 400 cpm
| 400 cpm
|
| Flow of each cycle
| 0.15 L
| 0.15 L
| 0.45 L
|
| Max. Air Consumption
| 350 NL/Min
| 380 NL/Min
| 960 NL/Min
| 2700 NL/Min
| Max. Size Solid
| 3/32" (2.4mm)
| 3/32" (2.4mm)
| 1/8" (3.2mm)
| 1/4" (6.4mm)
| Suction Lift Capability
| 6.4m Primed ; 3.7m Dry
| 5.48m Primed / Dry
| Weight of Pump
| 6.5 kg
| 6.5 kg
| 15 kg
| 54 kg
| Dimensions L x W x H (cm)
| 25 x 19 x 30
| 26 x 20 x 30
| 29 x 26 x 39
| 48 x 39 x 64
|
There is no slide or rotate part, our air pump has very good efficiency even with when pumping high adhesive liquids with low flow rate. The pressure or the outlet of air pump could be regulated when the machine is running, there is no necessary to buy any high cost speed changeable motor or drive device. No damage to our air pump if running with no input for a long time. The input pressure will never excess the output pressure. No necessary to buy any pressure release device or by-pass. The outlet of our air pump can be shut down at any time if necessary. Pump will stop immediately and won't cause any power waste, heat production or any abrasion damage. If you want to start the pump again, just open the outlet of the pump and it will start automatically. The efficiency of our pump will never be reduced by any abrasion. Manual, remote or automatic control can be used to regulate the pumping output. In normal conditions, our air pumps are suitable for explosion environments without the need for any explosion proof motor or controller. Our Air Pumps are explosion proof. The flow rate regulation is controlled by air valve so no need for reflux device. Our Air pump diaphrgms are of highest quality. Our air pump is small and light, so very mobile.
Advantage Over other Types of Pumps Include: Very simple to control Efficiency is constant even when pressure or flow rate is changed Allows idle running & suction head to 21" (6M) Various pumping speed possible Various pressures possible (to 125PSI) No mechanical seal Explosion proof Water resistance Portable No rotating parts (or Internal bearings) Idle running does cause any damage to pump parts No connectors needed Pressure balance (no oil pressured valve) Efficiency stays unchanged not even if part abrasions occur
|
|
